Quote:
|
Originally Posted by bogstandard Bunkerbarge,
There is only one way to set servos.
Do you mean swap over the + and - to motor inside the servo or the servo leads themselves.
Sorry about being so stupid but my brain hurts. |
The cable from the plug to the servo that you plug into your receiver is a three core cable. They can be black, red and white or brown, orange and red or maybe even differrent colours but one is always the signal to the servo and the other two are the power to the servo motor. If you cut the power cables, bare them and reconnect then the other way round you will reverse the operation of the motor in the servo. If you use a soldering iron and a bit of heat shrink over the cores you should get a neat enough job.