| Just a thought,
Ok connect both servos up via a Y lead but mount the servos head to toe so to speak and do the connections on the servo output arms accordingly..surely this will give the required outputs without having to rewire anything...??
I hope you can visualise what I mean...it is the easiest way of solving this problem purely by way of mounting the servos.
I have included a rough Diagram as an example, so you so can get an idea of where the pushrods should go etc...and the servo orientation (Mounted head to toe so to speak)...almost back to the days of V tail mixing long before mechanical mixers and computerised mixers were available...and that worked too !!!
Regards....Mark.
__________________ I'm Only Here Coz I'm Not All There !!!   |