Started to build the bottom of the main structure.
The drawing
The parts are glued to 1mm karton, and the top of the two side pieces are sanded to get an angle for the inside cover.
The cover for the bottom are cutted out.
And glued to the bottom.And the piece for the underside of the engine is made ready to glu into the "hole".So far the fitting of the parts has been very good.
So over to the inside of the vehicle.
The first part of the inside is the floor.
And a support for the radiostack and some other parts was to be made.
Drawing of that part.
Parts are glued to 1mm karton,kutted out and assembled.
The covers are glued together and everything putted into place to see how it all fit.
The bottom cover in the engine room.
Next will be the engine and the radiator.