| Another point to look out for is AIR you need to let air in for the burner to work , so all the doors side gratings top gratings need to be made to work if not the boiler will sufecate another hint is I dont know if you are using a gas tank or cannister(disposable) if you intend to run in cold weather it can be an idea to fit your separator in the same are as the gas to bring a little warmer and also as the engine/boiler is one unit try to make it so it can be easy to remove for clean and service this can be done verry easy and on the mounting point try to keep it as low as you can ,if the engine is lower than the shaft , you can use packing blocks under the engine and leave the boiler lower all on the same base this stops roll.
I have sent you a e-mail ....Peter |