Scale Models - View Single Post

Johnny · 31-10-2007

Hello!!

Time to start a new model

This time I will try to build the PzKpfw II Luchs from Wak.

The main frame was to be built of lasercuts....

First the drawing

Parts for the frame

When I had assembled the frame I noticed something was wrong......I had done the most stupid error you can do.I had assumed both sides of the frame was equal.They were NOT!!!! So with a massive punch from my fist the laserparts hit the dust.....
I then had to make the frame the old fashioned way.....yes thats right,by cutting new parts

So here is what I have done so far.....

Next will be to add some smaller pieces on the frame and make the air vents at the rear end.

31-10-2007	#1 (permalink)
Johnny Cardmodeller Join Date: Jul 2006 Location: Odda Norway Real Name: Johnny My Models: Papermodels Visit Johnny's Gallery Posts: 415 Images: 19	[Finished] PzKpwf II Luchs 1:25 Wak Hello!! Time to start a new model This time I will try to build the PzKpfw II Luchs from Wak. The main frame was to be built of lasercuts.... First the drawing Parts for the frame When I had assembled the frame I noticed something was wrong......I had done the most stupid error you can do.I had assumed both sides of the frame was equal.They were NOT!!!! So with a massive punch from my fist the laserparts hit the dust..... I then had to make the frame the old fashioned way.....yes thats right,by cutting new parts So here is what I have done so far..... Next will be to add some smaller pieces on the frame and make the air vents at the rear end. Last edited by Johnny; 08-06-2008 at 07:09.