Scale Models - View Single Post

Mankster · 01-02-2008

I would try and move the water intakes where they would be more cosmetically acceptable. The front or rear bulkhead below the surface water line (may be hard to get to once you have bonded the middle deck, if you dont make a bigger opening) or even lower down nearer the bottom of the hull away from eye shot.
Looks like you have the TAES controller board with the depth controler plug on module. Only a slider (or a the main stick with the spring removed) will be able to control that properly.

01-02-2008	#23 (permalink)
Mankster Scale Model Member Join Date: Oct 2005 Location: London My Models: RC Postwar Subs and Naval ships Visit Mankster's Gallery Posts: 271	I would try and move the water intakes where they would be more cosmetically acceptable. The front or rear bulkhead below the surface water line (may be hard to get to once you have bonded the middle deck, if you dont make a bigger opening) or even lower down nearer the bottom of the hull away from eye shot. Looks like you have the TAES controller board with the depth controler plug on module. Only a slider (or a the main stick with the spring removed) will be able to control that properly. Last edited by Mankster; 01-02-2008 at 07:26.