Scale Models - View Single Post

**GEEDUBBYA** · 31-03-2008

Howdy WVMountaineerfan,

First Let me welcome you to the forum, we're glad you are here. Feel free to jump into any conversation that interests you. Give advice or ask questions and by all means, If you have any photos of your work, post them, we love to see other peoples work

Now, on to the question, on this particular model I used the metal wire from garbage bag "tie-twists". I simply stripped off the paper coating and heat one end of the bare wire with a cigarette lighter and "melted it" into one location on the plane, then I positioned the excess wire so I could get an idea of the length I needed and "snipped-off" all of the excess except for about an 1/8th of an inch. I then heated that end the same way as I did before and using pliers pushed the hot wire into the plastic in the position I wanted it. I did each wire like this until I had them all in.
Now this is just one way to make guy wires, my favorite method, which I would have done had I had the material at the time, is to use monofiliment fishing line.
I superglue one end to the model, then place a small "dab" of superglue in the place I want to attach the other end to. I then pull the fishing line tight and hold it against the 'dab" of superglue until it "sticks". Then I wait a few minutes to make sure the glue will hold and I snip off the excess as close to the point of cantact as I can.
Now for the fun part, I then heat the fishing line which is stretched between two points of superglue, with a lit cigarette (a hairdryer will work too), This causes the fishing line to shrink, becoming tighter between the two points.
After it tightens up, I am then free to paint the fishing line with black, silver or other colors of enamel paint.
This method is by far the best and easiest method for making guy wires that I have found. Being that fishing line comes in many different sizes (diameters), you have no limits as two what scale you can put it on.

I hope this answers your questions and again, welcome to the forum,

Greg aka GEEDUBBYA (GW)

31-03-2008	#5 (permalink)
GEEDUBBYA Moderator Join Date: Jan 2005 Location: Pine Bluff, Arkansas Real Name: Greg My Models: model planes tanks and helicopters as well as missiles and rockets Visit GEEDUBBYA's Gallery Posts: 1,002 Images: 329	*Howdy WVMountaineerfan,* First Let me welcome you to the forum, we're glad you are here. Feel free to jump into any conversation that interests you. Give advice or ask questions and by all means, If you have any photos of your work, post them, we love to see other peoples work Now, on to the question, on this particular model I used the metal wire from garbage bag "tie-twists". I simply stripped off the paper coating and heat one end of the bare wire with a cigarette lighter and "melted it" into one location on the plane, then I positioned the excess wire so I could get an idea of the length I needed and "snipped-off" all of the excess except for about an 1/8th of an inch. I then heated that end the same way as I did before and using pliers pushed the hot wire into the plastic in the position I wanted it. I did each wire like this until I had them all in. *Now this is just one way to make guy wires, my favorite method, which I would have done had I had the material at the time, is to use monofiliment fishing line.* I superglue one end to the model, then place a small "dab" of superglue in the place I want to attach the other end to. I then pull the fishing line tight and hold it against the 'dab" of superglue until it "sticks". Then I wait a few minutes to make sure the glue will hold and I snip off the excess as close to the point of cantact as I can. Now for the fun part, I then heat the fishing line which is stretched between two points of superglue, with a lit cigarette (a hairdryer will work too), This causes the fishing line to shrink, becoming tighter between the two points. *After it tightens up, I am then free to paint the fishing line with black, silver or other colors of enamel paint.* This method is by far the best and easiest method for making guy wires that I have found. Being that fishing line comes in many different sizes (diameters), you have no limits as two what scale you can put it on. *I hope this answers your questions and again, welcome to the forum,* *Greg aka GEEDUBBYA (GW)*