Quote:
Originally Posted by maninblack   hi lads
fitted my kehrers to the bottom of skydiver, i have 1 BIG problem..
when powered they work fine then 1 stops only 1 the same one
tryed jets before and worked fine...
when running you can see the water but when the 1 which stops the water is frothy, felt underneath when running and sucking fine then nothing even with outlet under water, if you power than stop than power it seems to work fine, please help lads
M.I.B |
Hi Mick,
When you say stops, do you mean the motor stops running or is it the motor keeps running but it doesn't produce a jet of water ?
If so, its cavitation inside the ventury it can suck air in and it forms a bubble which will not get pushed out as it gets trapped just make it a little bit heavier or lighter at the rear, it should cure it. My Pibber does it when it leaps out of the water but just for a second until it bites then its off again.
The outlets are intended to be 3/4 submerged not fully as this will stop the air comming out
Hope this helps.
Regards Sub.