Thanks Guys,
As Mankster says its the old 1:100 scale Typhoon that Norbert Bruggen used to do , he sold the moulds off to KMB modelbau in Germany,( I think )
I got mine about 6 yrs ago from Norbert.
Been waiting to get some accurate info before building it
( Thanks Mankster )
You don't get a full hull just 4 bits of fibreglass mouldings front, rear and two middle bits and the tower plus some vanes.
No instructions or plans.
The rest as they say is up to you.
The bits you get are stand off scale so require a hell of a lot of work to get it to look right ( if you want to that is ), and if you want the hull details etc then its all up to you, the mouldings don't have much detail on them but are good and solid so stand up to some serious work though.
Access is through the lift off centre missile deck which is more than adequate for my use.
I cut all the ends off the mouldings I got and fibreglassed them all together to form one free flood through hull and constructed my own dive module which sits in the free flood area, keeps the weight down for lifting etc.
Thanks for the interest.
Sub.