Scale Models - View Single Post - RedBaron Fokker Triplane model-Issue 68 Tank Fittings

**wonwinglo** · 21-04-2005

Carefully remove all burrs and make sure that the fittings lie flush against the flat surfaces of the fuel tank,dry fit and then fix with medium cyno.
Once we know the exact position straps can be fabricated from Bond notepaper and fixed with thinned down PVA.

The completed tank looking from the top & bottom and looking good,finish off with a coat of Johnsons Klear.

21-04-2005	#1 (permalink)
wonwinglo Moderator Join Date: Apr 2004 Location: Warwick,UK Real Name: Barry My Models: Aviation artifacts Visit wonwinglo's Gallery Posts: 5,564 Images: 49	RedBaron Fokker Triplane model-Issue 68 Tank Fittings Carefully remove all burrs and make sure that the fittings lie flush against the flat surfaces of the fuel tank,dry fit and then fix with medium cyno. Once we know the exact position straps can be fabricated from Bond notepaper and fixed with thinned down PVA. The completed tank looking from the top & bottom and looking good,finish off with a coat of Johnsons Klear. __________________ 'And there I was oil on my goggles from a broken pipe,then I looked at the altimeter,all I could see was the makers name !' www.wonwinglo.scale-models.net/ Last edited by wonwinglo; 21-04-2005 at 08:26.