Scale Models - View Single Post - Red Baron Fokker Triplane-Issue 73,Carburettor bracket.

**wonwinglo** · 30-05-2005

http://www.wonwinglo.scale-models.net/id42.htm

I have prepared a tutorial on how my own carburettor assembly was modified,at the same time the engine droop scenario has been rectified with an extended bearing,I would stress that these are un-official mods and nothing to do with Hachette ! the system utilises as much as possible of the original parts and just needs a few pieces of brass or alloy tube.
Any questions and I will be pleased to answer them.

30-05-2005	#2 (permalink)
wonwinglo Moderator Join Date: Apr 2004 Location: Warwick,UK Real Name: Barry My Models: Aviation artifacts Visit wonwinglo's Gallery Posts: 5,561 Thanks: 3 Thanked 2 Times in 2 Posts Images: 49	Modifications to the carburettor support assembly-Issue 73. http://www.wonwinglo.scale-models.net/id42.htm I have prepared a tutorial on how my own carburettor assembly was modified,at the same time the engine droop scenario has been rectified with an extended bearing,I would stress that these are un-official mods and nothing to do with Hachette ! the system utilises as much as possible of the original parts and just needs a few pieces of brass or alloy tube. Any questions and I will be pleased to answer them. __________________ 'And there I was oil on my goggles from a broken pipe,then I looked at the altimeter,all I could see was the makers name !' www.wonwinglo.scale-models.net/