| Notices |
Welcome to the Scale-Models forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us.
|
 | 
26-05-2005
|
#1 (permalink)
| | Moderator
Join Date: Apr 2004 Location: Warwick,UK Real Name: Barry My Models: Aviation artifacts Visit wonwinglo's Gallery
Posts: 5,610
| TWAIN Problem ?
At the moment I am on a standby computer and need to do some scanning,however when I attempt to import the TWAIN industry standard I keep getting the message 'Unable to find,check to see if the scanner is connected' I have checked & re-checked and tried different graphics programmes to no avail,the scanner is certainly connected but somehow it is not getting recognised,any clues as to what can be wrong here ?
Thanks.
PS-The scanner is on a USB link,I have tried re-connecting it direct rather than to the the powered hub but still no joy.
__________________ 'And there I was oil on my goggles from a broken pipe,then I looked at the altimeter,all I could see was the makers name !' www.wonwinglo.scale-models.net/ | 
|  | |
26-05-2005
|
#2 (permalink)
| | Founder
Join Date: Mar 2004 Location: Halifax Real Name: John My Models: rc cars & various model kits Visit John's Gallery
Posts: 1,474
| Have you tried rebooting? mine does this but I just reboot and it works.
On another note, do you know what TWAIN stands for?
I don't know if this is true but I've never seen any other meaning for it, it's supposed to be
"Technology Without An Interesting Name"
just thought I would throw that in free  | |
| | |
26-05-2005
|
#3 (permalink)
| | Experimenter
Join Date: Mar 2004 Location: Edinburgh Real Name: Chris My Models: Mainly boats, some cars , but most RC Visit adzam's Gallery
Posts: 1,053
| Quote: |
Originally Posted by John
I don't know if this is true but I've never seen any other meaning for it, it's supposed to be
"Technology Without An Interesting Name"
just thought I would throw that in free |
very inspirational john  | |
| | |
26-05-2005
|
#4 (permalink)
| | Moderator
Join Date: Apr 2004 Location: Warwick,UK Real Name: Barry My Models: Aviation artifacts Visit wonwinglo's Gallery
Posts: 5,610
| Quote: |
Originally Posted by John Have you tried rebooting? mine does this but I just reboot and it works.
On another note, do you know what TWAIN stands for?
I don't know if this is true but I've never seen any other meaning for it, it's supposed to be
"Technology Without An Interesting Name"
just thought I would throw that in free | ***Having just picked myself up from the floor laughing  I will go and give that a try ! thanks John.
__________________ 'And there I was oil on my goggles from a broken pipe,then I looked at the altimeter,all I could see was the makers name !' www.wonwinglo.scale-models.net/ | |
| | |
27-05-2005
|
#5 (permalink)
| | All Round Modeller | I had same problem not so long ago but just re-installed the drivers for my scanner and it sorted it.
Might be worth checking for latest drivers whilst you are there and try them.
Regards........Mark | |
| | |
27-05-2005
|
#6 (permalink)
| | Moderator
Join Date: Apr 2004 Location: Warwick,UK Real Name: Barry My Models: Aviation artifacts Visit wonwinglo's Gallery
Posts: 5,610
| Quote: |
Originally Posted by Bluewavestudios I had same problem not so long ago but just re-installed the drivers for my scanner and it sorted it.
Might be worth checking for latest drivers whilst you are there and try them.
Regards........Mark | *** You are correct Mark,on closer investigation I found another scanner driver installed,it must have been conflicting,thanks for your valued advice,Barry.
__________________ 'And there I was oil on my goggles from a broken pipe,then I looked at the altimeter,all I could see was the makers name !' www.wonwinglo.scale-models.net/ | |
| | |
27-05-2005
|
#7 (permalink)
| | Scale Model Builder | Quote: |
Originally Posted by John Have you tried rebooting? mine does this but I just reboot and it works.
On another note, do you know what TWAIN stands for?
I don't know if this is true but I've never seen any other meaning for it, it's supposed to be
"Technology Without An Interesting Name"
just thought I would throw that in free | It is true.
While we're on the subject of acronyms - see if you can guess what this one is -
Most Intelligent Customers Realise Our Software Only Fools Teenagers
Scottie | |
| | |
28-05-2005
|
#8 (permalink)
| | All Round Modeller | Quote: |
Originally Posted by wonwinglo *** You are correct Mark,on closer investigation I found another scanner driver installed,it must have been conflicting,thanks for your valued advice,Barry. | No Problem Barry, Glad to be of help.... anytime...!!, I'm glad you have it sorted...there are some drivers that do have to be uninstalled before you replace them with newer versions otherwise conflicts do occur, not a difficult job to do but worthwhile.
Regards.......Mark | |
| |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
|
