Go Back   Scale Models > Aircraft > Rotary Wing

Notices

Reply
 
LinkBack Thread Tools Display Modes
Old 13-03-2008   #1 (permalink)
Scale Model Member
 
subzero's Avatar
 
Join Date: Mar 2007
Visit subzero's Gallery
Posts: 196
Thanks: 2
Thanked 2 Times in 2 Posts
Twister Chinook

Well , just treated myself to the Twister Chinook electric heli, spent yrs flying underwater and thought it about time I tried the air, any one out there got one, Tried to download a free flight sim with the chinook on to get some simulator time in prior to going live but failed miserably any one of you Heli pilots got any ideas ?

Sub.
subzero is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Old 14-03-2008   #2 (permalink)
Scale Model Member
 
subzero's Avatar
 
Join Date: Mar 2007
Visit subzero's Gallery
Posts: 196
Thanks: 2
Thanked 2 Times in 2 Posts
Finally cracked the flight sim, Its very good, and have been getting some time in, I was quite amazed at how little imput is required on the transmitter sticks, think it helps being a sub pilot all these years, with being used to inputing multiple stick movements you just have to do them gently. I think I will keep to the heli CH-47 flight sim for quite a while until i pick up courage to try a short hop with the real thing though.

subzero is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 14-03-2008   #3 (permalink)
All Round Modeller
 
Bluewavestudios's Avatar
 
Join Date: Mar 2004
Location: Llandudno
Real Name: Mark
My Models: Boats, Planes, Helis, Cars, Anything R/C
Visit Bluewavestudios's Gallery
Posts: 1,229
Thanks: 0
Thanked 3 Times in 3 Posts
Images: 7
Hi Sub,

Sticking to the sim is the best way to go till you are confident with it, at least when you come to the model you will know what to expect with no nasty surprises.
Heli's are fun when you can handle them.

Have Fun !!

Regards.......Mark.
__________________
I'm Only Here Coz I'm Not All There !!!

Bluewavestudios is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 25-03-2008   #4 (permalink)
bao
Scale Model Member
 
Join Date: Jan 2008
Location: france
Visit bao's Gallery
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Hi sub
Nice little heli to begin on and as you have understood rc heli's are a lot of fine stick input and in a way very simillair to subs, pitch etc. one thing to be very carefull is that the sim though it is a very usefull tool ( i sim a lot) is not as good as flight.
To start with i would use your heli a little just using throttle to get it light on the landing gear but not taking off then give some stick movement sliding around the floor. You wont really have too much of a problem as twin rotors are quite stable and having 2 will make it very stable im sure.
Welcome to the over water scene and
Happy Flying
Steve
bao is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 26-03-2008   #5 (permalink)
Scale Model Member
 
subzero's Avatar
 
Join Date: Mar 2007
Visit subzero's Gallery
Posts: 196
Thanks: 2
Thanked 2 Times in 2 Posts
Thanks guys.

Well you were right I tried the real thing and it was like a lunatic wasp!!!!
Managed to take off and land ok.

Glad I tried the flight sim for a couple of weeks first. I did manage a slight hover but it decided to "Roll" right, I think thats the right term ( went sideways to a novice like me ) and the stick had little effect, and forwards too. Gave the plants in the garden a bit of a hair cut but nothing more im glad to say. I tweaked the auto gyro a bit and tried again but more or less the same result. MMMM i thought , I am sure I read somewhere that the swash plates need to be level in both planes ie front and back, well mine wern't, static test on the bench and used the radio and to get the swash plates level needed to input roll and forward/ backwards. A light bulb illuminated in my head and so I adjusted the control rods to get a level swash plate on both pylons when the trims and sticks are centralised in both planes. My thought is that it was doing what the swash settings were telling it to do and I couldn't dial it out with the sticks...well not quick enough for a numpty like me anyhow, hence the flower hair cut !.

I have not adjusted the amount of throw as I need the movent of the controls as gentle as poss right now.

Can you experienced Heli pilots let me know if what I have done is correct ?? I havn't tried it yet since the adjustments in case I have got it wrong.
ANY advice on setting it up would be most appreciated.

Sub.

Last edited by subzero; 26-03-2008 at 04:29.
subzero is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-03-2008   #6 (permalink)
bao
Scale Model Member
 
Join Date: Jan 2008
Location: france
Visit bao's Gallery
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
If you have the servo arms at 90° angles and the swash plates level you should be good to go, but when leveling the swash you need the throttle stick and trim at zero i imagine you did this though.

Happy Flying Steve
bao is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-03-2008   #7 (permalink)
Scale Model Member
 
subzero's Avatar
 
Join Date: Mar 2007
Visit subzero's Gallery
Posts: 196
Thanks: 2
Thanked 2 Times in 2 Posts
Thanks steve....

Yep, the throttle and trim was at zero, but thanks for mentioning it, always good for a newby to get as many tips as possible.

Sub.
subzero is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 27-03-2008   #8 (permalink)
bao
Scale Model Member
 
Join Date: Jan 2008
Location: france
Visit bao's Gallery
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Hi Sub
I didnt have time before going to work but i knew there was a good thread on the twister chinook here is the link.
"Skyhook" Chinook Helicopter. - RC Groups
It really is full of very helpfull info that i hope will come in handy.

Happy Flying
Steve
bao is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 28-03-2008   #9 (permalink)
Scale Model Member
 
subzero's Avatar
 
Join Date: Mar 2007
Visit subzero's Gallery
Posts: 196
Thanks: 2
Thanked 2 Times in 2 Posts
Thanks for the thought Steve.....

I have already found this link and its in my favourites, very, very useful, I have already used some of the advice on there.

First thing I do when starting a new subject is to gleen as much advice and experience of more acomplished people, once again many thanks.
I will no doubt require more of your advice in the not too distant future

Sub.
subzero is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 02:20.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
© 2004 - 2008 Scale Model Forums
Personal Loans | Credit Card Consolidation | Homeowner Loans | Car Credit | Problem Mortgage
ServInt Internet Services