Hairspray failure... going at it again! (Hairspray 2.0)

Joined
Nov 15, 2008
Messages
165
Points
43
First Name
Ty
The best results I've had was to spray the base coat. Let dry overnight. Medium coat of hairspray with a dry time of no more than 30 minutes. Coat of XF2 white using water as the thinning agent. (I tried it once using Tamiya acrylic thinner with XF2 but had to work extra hard to achieve mediocre results). I then got a flat point brush and snipped the bristles off at the half way point. The majority of chipping was done using that brush. I used a couple of other ones for fine work but they only really worked good when I used water as the thinning agent. Here's a couple of examples.d1_zps9f08718e.jpgIMG_5089t.jpg
 
Top