I think it is high time to show something that is actually being under construction. At the moment I'm building one of the most known Soviet airplanes in one of the rarest versions. The inspiration to build this one came unexpected when I purchased a Po-2 kit and found out it had a floated twin brother. Unfortunately quality of the kit is disappointing. I could manage flash, and sink marks, but I can't help it is not accurate to the drawings... Therefore I decided to build it from scratch: Here is the "front office" and changed concept of the fuselage chamber: I figured how to sort the bottom wing mounting. I simply sticked some Milliput to 0,8 mm injection needle and sanded down to shape (It's much easier than drilling through such a small bit..). I made two parts like this and used it to replace two bits from the fuselage structure. After I finish the fuselage I plan to make wings with location pins made of 0,5 mm needle whch precisely fits the 0,8 mm one. Next I started a spider web. :smile: The fuselage rigging additionally strengthened this part of assembly. Initially I did not make the spinal rigging, trusting that this would allow access to the fuselage chamber and ease mounting the trimmer lines. However after careful study of reference materials and confronting it with the opinion of experts it turned out that the particular aircraft did not have any trimmers. Next I dealt with fuselage structure of the fuel tank and cockpit compartments. Initially I thought I would use the PE parts. In concern of proper dimensions the PE fret contains doubled framework parts. Gluing them together should give the accurate thickness. Unfortunately comparing it to the drawing showed unacceptable difference. So I have no other choice than to make it from scratch. I have started from portside as this part of cockpit requires more details. This way I have access through right side which I will leave open till the left side is finished. Before I took care of starboard of the cockpit I decided to replace rudder pedals with more “delicate” ones – made up to the freshest idea. Then the right side framework was completed similarly to the left side.