1/200 Gpm Bismark with laser cut frames

[peterairfix]

I am going to knock my current bismark build on the head as I am not satisfied with the quality of the build it pretty much built the same way but the laser cut frames saves on the knife blades and trying to cut a perfectly circul is a right pain.
And each frame has a mark to make lining up the frames easier.

 

[Tim Marlow]

Pity about the previous build, but this one looks interesting Peter. Not small at that scale either.

 

[peterairfix]

The easy part of the build is done and I have added more strengthers and cut up strips of card to fill in the area between the bulkheads

 

[peterairfix]

Started covering the Hull I will need a bit of filler on the bow and the annoying thing is the laser cut frames take a lot of glue as it needs the first layer to dry before attaching the cover as it soaks up the first layer.

 

[peterairfix]

I have done a lot of work on this build ignore the bottles they are just to weigh down the superstructure while the glue dries

 

[adt70hk]

Great work Peter.

 

[Steve Jones]

Wow! You have been busy Peter. Looks an epic build. Good luck with the detailing

 

[mrtintheweb]

One, two, miss a few, ninety nine, one hundred......
T

 

[peterairfix]

Time to return to this build and I have decided to ditch the aft section and rebuild from the start.
I have all the frames in place and one wall cut ready for fitting

 

[peterairfix]

I have now started to replace some of the parts with the laser cut after market parts here are the ones I have done.

 

[peterairfix]

Here's today's work or should I say this mornings and I have been having a go at the aircraft hanger and got in place

 

[peterairfix]

After the dip in mojo I have picked up and done a bit more this time its the boat stowage areas above the hangers I have done the starboard side and have to do exactly the same on the port side

 

[Jim R]

Hi Peter
That's good progress. It all looks quite intricate. At this scale it must be a big model.
Jim

 

[peterairfix]

At this scale it must be a big model

Almost four feet long

 

[peterairfix]

Time to have another go and add some more this time I have decided to concentrate on the main deck going from stern to bow.

 

[boatman]

HI Peter i know you have started another bismark but did you ever fininsh this one ?
chris

 

[peterairfix]

did you ever fininsh this one

Still on going just a bit slow

 

[peterairfix]

Got fed up with plastic so it's back on the card and I am starting at the stern filling in the deck fittings.

 

[scottie3158]

Peter,
Coming on nicely.

 

[peterairfix]

Just spent the afternoon finishing off the stern most of it was spent on turret Dora.
Also I have been using the metal barrels but I have left them unpainted.