1/24 Hasegawa Lancia Delta HF Itegrale 16v 19911000 lakes rally.

outrunner

SMF Supporter
Joined
Apr 12, 2019
Messages
1,245
Points
113
First Name
Andy
I have decided to build a car for a change, I have 2 in the stash, both rally cars from the past but the Martini sponsored Delta is a realy nice colour scheme.
51048927872_a3b7d4cc41_b.jpg
Sprues.
51211112601_7e284ee5b5_b.jpg
51210397792_30ee6bc268_b.jpg
51212175845_5eecc1a73f_b.jpg
And lastly the decals. tyres and PE and ribbon for the seat belts, that will be fun.
51210397737_b6f73b3f42_b.jpg
On having a good look I notice a few bits of flash and a few mould lines to remove but as this is an older Hasegawa kit it is only to be expected as their new kits are virtually faultless.

Andy.
 

outrunner

SMF Supporter
Joined
Apr 12, 2019
Messages
1,245
Points
113
First Name
Andy
Not a lot of progress on this for a while as the weather has been so good I have been spending a lot of time out on my bike, the downside of the sunshine is that my attic workshop gets unbearably hot by the time evening comes. Anyway, I have done a wee bit on the inner part of the car.
51237782831_e4e41dbbdc_b.jpg
The paint in the footwells could do with another coat but I may not bother as when it's build you will hardly see them. The seats are painted but I need to make and fit the seatbelts before fitting and that will be a task, 2mm strips of ribbon fitted with tiny PE buckles and anchor points, I may be some time.

Andy.
 

outrunner

SMF Supporter
Joined
Apr 12, 2019
Messages
1,245
Points
113
First Name
Andy
Dash done along with the rollcage seats and seatbelts, they were fun to do I can assure you.
51248049720_0ea0082be1_b.jpg
51247196713_239f086911_b.jpg
Next up will be the floorpan and steering/suspension as I am leaving painting the bodyshell till last.

Andy.
 

outrunner

SMF Supporter
Joined
Apr 12, 2019
Messages
1,245
Points
113
First Name
Andy
Floorpan built and ready for fitting all the fiddly suspension parts.
51249318664_46c049ae54_b.jpg
I should get all that done today and then I can start on the bodyshell which will involve a lot of tricky masking around the windows and the black strips on the shell.

Andy.
 

outrunner

SMF Supporter
Joined
Apr 12, 2019
Messages
1,245
Points
113
First Name
Andy
Well I have the bulk of the build done.
51251242616_cb630e59ce_b.jpg
51250512917_d7e0d02be5_b.jpg
All four wheels on the ground so I must have done something right.
First coat of white on the shell.
51251437658_0d828236f1_b.jpg
Once the painting is finished I will let it sit for a couple of days to harden up as there is quite a lot of masking to do for the black parts. Now I will need to find something else to occupy my time.

Andy.
 
Top