B
Boldman
Guest
In my plans ofr my 1:48 BoB diorama, I had bought one of the 1:48 Tamiya Tilly kits and then discovered from my research that the RAF didn't use the Austin Tilly but used the Standard or Hillman Tilly. So in the end I ordered a 1:48 Standard Tilly from Accurate Armour. However, I had started building the Austin Tilly and it is a neat little kit. On a trip to Model Zone I saw the 1:35 scale version and something took hold of me and the next thing I knew I was walking out of the shop with the kit in hand... and a receipt for it of course!
So now the 1:48 Tilly has been set aside to be replaced by its big brother. Then along came the April to June Group build and approval for this to qualify, so here goes the construction so far...
There are 3 colour schemes shown in the instructions. I'm building the basic green colour scheme.
Starting with the chassis and engine:
View attachment 26643View attachment 26644
I haven't got involved in superdetailing, my eyesight just isn't good enough for lots of tiny wires and extra details, especially as the bonnet will be closed so the engine won't be visible. However for my own satisfaction I try to do a decent paint job in it.
Next, the chassis which has quite a bit of underbody detail:
View attachment 26647View attachment 26648
Next comes wheels and bumpers. The wheels are only pressed on for the moment. They will need more weathering done to them:
View attachment 26649
Next is the cargo area. This will be without the tilt covering it so I will be adding the frame poles later. The wooden floorboards have been suitably weathered in preparation for the load it will carry to qualify for the Group Build
View attachment 26651View attachment 26650
I've used the wooden tailgate instead of the pressed steel one.
Finally so far, tonight the seat went in and some more weathering was done on the wheel wells.
View attachment 26652View attachment 26653
So that is progress so far...
View attachment 32558
View attachment 32559
View attachment 32560
View attachment 32561
View attachment 32562
View attachment 32563
View attachment 32564
View attachment 32565
View attachment 32566
So now the 1:48 Tilly has been set aside to be replaced by its big brother. Then along came the April to June Group build and approval for this to qualify, so here goes the construction so far...
There are 3 colour schemes shown in the instructions. I'm building the basic green colour scheme.
Starting with the chassis and engine:
View attachment 26643View attachment 26644
I haven't got involved in superdetailing, my eyesight just isn't good enough for lots of tiny wires and extra details, especially as the bonnet will be closed so the engine won't be visible. However for my own satisfaction I try to do a decent paint job in it.
Next, the chassis which has quite a bit of underbody detail:
View attachment 26647View attachment 26648
Next comes wheels and bumpers. The wheels are only pressed on for the moment. They will need more weathering done to them:
View attachment 26649
Next is the cargo area. This will be without the tilt covering it so I will be adding the frame poles later. The wooden floorboards have been suitably weathered in preparation for the load it will carry to qualify for the Group Build
View attachment 26651View attachment 26650
I've used the wooden tailgate instead of the pressed steel one.
Finally so far, tonight the seat went in and some more weathering was done on the wheel wells.
View attachment 26652View attachment 26653
So that is progress so far...
View attachment 32558
View attachment 32559
View attachment 32560
View attachment 32561
View attachment 32562
View attachment 32563
View attachment 32564
View attachment 32565
View attachment 32566