1/35 wooden crates & tarpaulins

A

Awins

Guest
Please can anyone advise where or buy or who makes 1/35 wooden crates and tarpaulins. I want to add these to the back of my IBG models Bedford QL.


Thank you
 
Steve Brodie

Steve Brodie

SMF Supporter
Joined
Sep 17, 2014
Messages
3,734
Points
113
Location
Shropshire
First Name
Steve
Try Value Gear, great products and a few designed sets for various vehicles


http://valuegeardetails.com/


Should find something to fit !
 
ojays

ojays

Joined
Oct 16, 2011
Messages
2,149
Points
113
First Name
Gregg
www.valuegeardetails.com


Great items well produced.


I have several spare crates/boxes etc. I can let you have if your interested !


Gregg
 
J

John Rixon

Guest
\ said:
Please can anyone advise where or buy or who makes 1/35 wooden crates and tarpaulins. I want to add these to the back of my IBG models Bedford QL.
Thank you
Click to expand...
Ooh, you built one of them? How was it? On my soft-skin wish list
 
D

dubster72

Guest
FoG do the Valuegear range (if you'd rather use a UK supplier


http://www.fieldsofglorymodels.co.uk/valuegear-43-c.asp
 
ojays

ojays

Joined
Oct 16, 2011
Messages
2,149
Points
113
First Name
Gregg
These are some of their products on my Italeri S-100 if it helps!014.JPG

011.JPG

016.JPG

015.JPG

009.JPG
 
A

Awins

Guest
\ said:
Ooh, you built one of them? How was it? On my soft-skin wish list
Click to expand...
Scott, Its not a bad kit but there are one or two fitting problems to overcome namely the cab front to back wall. I had to pack this out with plastic card.


It was detailled in one of the military model mags last summer and the same issue was reported then too.


Give it a whirl it is rather detailed but unfortunately most of it is hidden.


Cheers Scott
 
stona

stona

SMF Supporter
Joined
Jul 22, 2008
Messages
11,492
Points
113
First Name
Steve
\ said:
Try making them.
Scott
Click to expand...
I was going to suggest that. I'm sure Ron would be the man to chip in. He made some very convincing looking boxes/crates for his Rorke's Drift dio and has a knack for things like this.


Cheers


Steve
 
Ian M

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,807
Points
113
Location
Falster, Denmark
First Name
Ian
In my Bedford, I cut blocks of polystyrene foam then covered them with tissue soaked in PVA glue.


I'm sure it's on here in the soft skin section....quite a while ago so you will need to dig a bit....
 
0

0ne48thtel

Guest
I would also lean towards making them. I would try coffee stirrers for the crates and unpatterned tissue paper brushed with diluted PVA for the tarps.
 
You must log in or register to reply here.
Top