CDWs' Hummer 1025

C

CDW

Guest
Got it sorted at last

Was going to do the cargo version but this had more appeal when i saw it.

Am aiming to do it in black, green and sand camo and will display it doors/bonnet/boot open so the interior is visible, to which i will add some scratch built bits and other items.

Here's the box/sprue shots with the wood base that Polux has requested it to be displayed on.

View attachment 56474View attachment 56475View attachment 56476

View attachment 58531

View attachment 58532

View attachment 58533

20130114_180105.jpg

20130114_180214.jpg

20130114_180257.jpg
 
P

Polux

Guest
Very nice choice Colin!

Well.... As you are a scratch building addict (see your under nick ;) ), I will wait another of your great models!!

Good luck mate!

Polux

Ps: are the interiors Ok? Are or seens a good kit?
 
C

CDW

Guest
The interior is a little sparse, it just has basic seats and controls but i think i'll be able to improve it a bit.
 
P

Plastickitbasher

Guest
Looks good so far will watch with interest for the scratch building, hopefully I'll learn something from the master ;) no pressure Colin lol
 
C

CDW

Guest
Well i had a look at this properly today and there's a bit more work involved than i thought to display it as i want to (i.e. doors/bonnet open etc)

The engine only has the lower part in the kit as thats all to see if you look at the bottom of the built model ... so it'll be t'intergoogle to find picture of what the top end looks like.

The side doors are molded in one piece so i'm going to have to cut the doors out and then scratch the frame work for the chassis.

The interior is quite sparse but as it's a military vehicle thats expected, there seems to be just a couple of levers and braces to be added.

All in all it's a good job we've got 6 months to do it :smiling3: :smiling3:
 

stona

SMF Supporter
Joined
Jul 22, 2008
Messages
11,455
Points
113
First Name
Steve
Excellent Colin. I've got the same one as you and will be shamelessly cribbing as you procede :smiling3:

I'm pretty certain that you'll know a lot more about these things than I do!

Cheers

Steve
 
C

CDW

Guest
\ said:
I've got the same one as you and will be shamelessly cribbing as you procede :smiling3:
That'll be two of us on a slippery path then :smiling3:

Made a start on this.

Got the chassis made up and have painted the floor pan in its base colour, then will weather it so i don't have to work around the chassis when it's glued in place as you see from the dry fit in the last picture.

The chassis will be flat black as per from the assembly line weather-proofing, the reference piccies i have for the camo pattern i'm attempting show no extra paintwork to match the body.

View attachment 56752View attachment 56755View attachment 56756View attachment 56757

One thing i have noticed is my destructions tell me to put the front anti-roll bar t'other way up from what Graham has his, but cant find a real image at the mo to confirm.

It seems i'm going to have to build most of the body up so i can get an idea how much room i've got to scratch the engine. found a picture of the V8 to reference and it's pretty much a plastic cover with some bottles, pipes etc so not too hard. i'll be adding cables and a few pipes to increase the detail. The air pipe will have to be routed all around the engine to the snorkle base on the model.

View attachment 56762

View attachment 58800

View attachment 58803

View attachment 58804

View attachment 58805

View attachment 58810

20130119_193849.jpg

20130119_193900.jpg

20130119_193930.jpg

20130119_193955.jpg

hummer-h3t-alpha-engine.jpg
 
S

Sky Raider

Guest
You are teasing me now Colin, im dead set on getting a Hummer this year though im still enjoying my 6 wheel Dodge Ram.

Nice work though mate.

Andy
 
C

CDW

Guest
Got a bit done on this this afternoon.

weathered the underside, fitted fuel tank(?) then added the sides and inner wings.

View attachment 56883View attachment 56884

Painted the chassis and only weathered it to be muddy as it's a newish vehicle.

View attachment 56882

Fitted brake pipes (although these won't be seen when its on its base ..hmmm sometimes i think "why bother" :smiling3: )

View attachment 56885

This is how it looks at present, just have to weather the new added parts where needed and add the exhaust pipe when it's dried.

View attachment 56886

View attachment 58919

View attachment 58920

View attachment 58921

View attachment 58922

View attachment 58923

20130120_175733.jpg

20130120_175831.jpg

20130120_175852.jpg

20130120_184054.jpg

20130120_184335.jpg
 
F

Fenlander

Guest
Nice one Colin. Don't take any notice of what I do, I am known for making up as I go along. Roll bar on mine could well be wrong! Great start bud.
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,584
Points
113
Location
Falster, Denmark
First Name
Ian
I hope I'm not to late, but that motor, looks like it might be from a Hummer, the civilian car, not a Humvee, the Army one. The military one is a bit more robust.

Loads of lovely photos here:

HUMVEE Maintanance/ onderhoud « HUMMER huren

Ian M
 

geegad

Can't cheat fate..
Joined
Mar 7, 2010
Messages
2,477
Points
113
First Name
John
your cracking on with this build buddy and your doing an quality job buddy
 
C

CDW

Guest
\ said:
I hope I'm not to late, but that motor, looks like it might be from a Hummer, the civilian car, not a Humvee, the Army one. The military one is a bit more robust.Loads of lovely photos here:

HUMVEE Maintanance/ onderhoud « HUMMER huren

Ian M
No you're not too late mate:smiling3:

The site that i found that picture on said that that " H3T - Alpha" engine was fitted to military and civilian vehicles.

However the link you provided lead me to find this .... much more like what you'd expect for an army engine .... a bit more work needed to scratch it up, but it'll look much better eh?

View attachment 57015

Ta muchly Ian.

View attachment 58992

humvee_engine_01_of_15.jpg
 
C

CDW

Guest
after a few hours surviving the apparent ice-age conditions (i.e. nipping to shops and playing snowballs with the dog:smiling3:) i got to the bench

weathered the interior a bit as a start before adding all the interior.

View attachment 57044

Spent half hour or so separating the doors, picture shows before and after.

View attachment 57045

Got the seats covered in laggers tape to give a bit of texture, painted them up and stuck them in position.

View attachment 57043View attachment 57047View attachment 57048

as the bonnet is going to be open i've had to stick the lifting rings on the chassis as they would be in reality and not just glued to the underside of the bonnet in the case of the model.

View attachment 57046

added the windscreen and cut away the mounting for the snorkle that was moulded in the bonnet and fitted in position. there's enough room under it to fit the hose i'm scratching up with the engine.

View attachment 57049View attachment 57050

View attachment 59020

View attachment 59021

View attachment 59022

View attachment 59023

View attachment 59024

View attachment 59025

View attachment 59026

View attachment 59027

20130121_141114.jpg

20130121_141214.jpg

20130121_142756.jpg

20130121_145755.jpg

20130121_145846.jpg

20130121_151237.jpg

20130121_193710.jpg

20130121_193737.jpg
 
P

Polux

Guest
That's a fantastic and good work so far!!

Is coming on very nicely colin!

Cheers
 
C

CDW

Guest
Had an afternoon trying to create seatbelts, this is the end result. research indicated that the early models had no passenger restraint then they added three point belts in the front and lap belts in the rear which is the era i'm going for (just coz it looks ok really :smiling3: )

Also took some wires from the back of the radio through the bulkhesd under the dash for connecting later to some engine electrics, and added the side struts so the belts attach on the inside and the rear door hinges have an external fitting point.

View attachment 57121View attachment 57122View attachment 57123

View attachment 59091

View attachment 59092

View attachment 59093

20130122_233509.jpg

20130122_233537.jpg

20130122_233635.jpg
 
Top