I've always wanted to build a boat...Chat

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
but been to afraid to start..

Just to get things moving, chat about the build a boat Super SIG can (read should) be put in here :smiling3:

Questions, ideas, photos, suggestions---

Bring it!

Ian M
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
I will start the ball rolling on this one.

My vision with this build is to try get some of you that have seen Andy's great RC boat builds and thought "I'd love to have ago at that". Well here is that kick in the rear to get you started.

I does not have to be a Radio controlled boat, it could as well be a static model.

I would also like to say that I imagine that they will not be trumpeter of Tamiya kits but a Wood or glass fibre kit.

Yes that do cost a bit more but like all things, where there is a will there's a way...

Ian M
 
C

CDW

Guest
This SIG should have been ages ago .. I've got a scratch 44inch crab boat sitting on a shelf waiting to be weathered ...

Don't suppose I can bribe you with alcohol to look the other way for six months eh Ian?? :smiling3: :smiling3: :smiling3: :smiling3:
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
LOL Colin. That would be a great idea but I feel that it is taking it just a bit close to the line.

I have a 1m Slo-mo hydro in the shed that would be a good one. If it was not 80% built...

I do however have a tube with six or eight plane drawings in for some others. The one that 'floats my boat' most is a 63' whale back torpedo boat...I just might have it doubled up so it comes up to around 2 meter. I also have some for a Baby bootleg which again would look nice at around 1.5m

I did have an offer for a 4m long hull for HMS Hood.... But a, would never find a place for it. b, would never be able to sneak it past the door watch. c, i would need a boat trailer to move it.... One of the things to be taken into account with this sort of thing is where to keep it!

Ian M
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
Thinking about it is a year long enough? lol

Ian M
 
C

CDW

Guest
\ said:
Thinking about it is a year long enough? lolIan M
Errr .... Maybe?

I like the sound of that ''whale back torpedo'' jobbie... Going to have to t'intergoogle that.
 
B

Bunkerbarge

Guest
View attachment 70441


This is actually a great idea for a build as it makes us as modellers think a bit more outside the box. Get away from plastic and glue and dig into completely different materials. This came about during the build of the Ben Ain, when I realised I needed to do something better than the fibre glass moulding supplied with the kit for the ship's boats. Looking around for those pieces that were needed to add detail was all part of the great enjoyment I had in building this model, from tin foil for the canvas cover to electrical shrink wrap for the leather oar protectors.

Perhaps a bit of inspiration may be had from looking at Chapter Fifteen of the Ben Ain build here:

http://www.scale-models.co.uk/threads/steamer-ben-ain.1711/page-7

Get oputside your comfort zone and have a crack at something you have never tried before!

View attachment 70440


View attachment 70438


View attachment 70439


View attachment 70442


IMG_0031.jpg

0013.jpg

IMG_0016.jpg

IMG_0018.jpg

15.jpg
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
So just had a look and its actually a 63ft RAF rescue launch drawn by John Pritchard. I just happen to know that this hull was also used for a torpedo boat.... :/

So good places to start your project?

Well If you are going to start, like me with a plan and a plank, this is a good place to start http://www.myhobbystore.co.uk/sector/58/model-boat-plans?p=1 A huge selection of plans for all kinds of boats and ship.

If you are more to the kit or semi kit you could look in on any of these:

http://www.modelslipway.com/

http://www.deansmarine.co.uk/shop/index.php/cPath/10

Ian M
 
O

omi1966

Guest
Built this last year her in doors would kill me if I started another!

All balsa and fibre glass. Sails great

Martin
 

peterairfix

SMF Supporter
Joined
Jul 19, 2012
Messages
7,291
Points
113
Location
Taunton
First Name
peter
Would a full scratch built ship fit as i am waiting for a 1:1 1/ 250 plan for a titanic this would mostly be of wood but completly scratch built size 1m 4cm .

peter t
 
B

Bunkerbarge

Guest
Other useful sources of semi kits are:

http://mountfleetmodels.co.uk/

http://www.mobilemarinemodels.com/

and a supplier of beautifully laid fibre glass hulls:

http://www.kingstonmouldings.co.uk/

and a couple of model boat/ship materials and model suppliers:

http://www.jotika-ltd.com/ (they also do thier own range of model kits.)

http://www.model-dockyard.com/

http://www.cornwallmodelboats.co.uk/

finally a great source of inspiration:

http://www.modelboats.co.uk/

there are some really good steam related articles in there by some guy called Simpson.
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
Sure peter, that would be great. Its not about the size.

Ian M
 

peterairfix

SMF Supporter
Joined
Jul 19, 2012
Messages
7,291
Points
113
Location
Taunton
First Name
peter
Thanks i will start collecting my bits as that will take a few months.

peter t

\ said:
Sure peter, that would be great. Its not about the size.Ian M
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
Nice boat Richard, but the one I have my eye on is the same type as the Airfix kit RAF rescue launch.

Ian M
 
B

Bunkerbarge

Guest
Got it, the Whaleback made me think of this style.

By the way any idea why a post in here does not appear in the list of recent posts on the main forum page?
 

Ian M

Administrator
Staff member
Administrator
Moderator
SMF Supporter
Joined
Dec 14, 2008
Messages
19,583
Points
113
Location
Falster, Denmark
First Name
Ian
Hmm no actually. It shows on mine. Does it come up if you choose the list 'recent posts' ?

Ian M
 
B

Bunkerbarge

Guest
No, oddly enough! I've looked at it from three different computers now and get the same.
 

peterairfix

SMF Supporter
Joined
Jul 19, 2012
Messages
7,291
Points
113
Location
Taunton
First Name
peter
I walked into bookers today and managed to blag my way to a 1000 pack of wooden stirrers at a cost of £2.03 witch is more than enough for titanic

peter tView attachment 70784


2013-10-09 13.31.24.jpg
 
C

Caledonia

Guest
Have had this project in the planning for some two years now, as some of you may remember from earlier postings. No real drawings exist other than in I book I secured on ebay. There are lots of photos on the internet, so it will be a combination of the basic drawings from the book corrected as per the photos available. It will be a 1:80 static wooden plank on frame construction scratch build. Only problem I have is that I may not be able to finish it by the end of the year is this a problem?

The project is the Steam Yacht Scotia used for the 1902-04 Scottish Antarctic Expedition. Comments Welcome.

View attachment 76228


st-def-bruce-ship.jpg
 
Top