Robbe S-130 E-boat

[artic-corsair]

i've just finished making and modifying this boat for a friend , a pig of a build as everything is plastic and the hull was a nightmare to trim and line up, the rear deck did'nt fit properly, the front deck took ages to get right as there are some curved bits of plastic that have to be glued in to make the join to the hull ,once all of the hull was completed the rest went more smoothly , and i then added exrta details from a book that my friend had lent me , i'm going to build a class s9 next from vic smeed's plan from a few years ago , it's the same scale 1/40, were going to test run the s-130 on sunday , i will get some on water pics, i tested the motors in the bath ( all three of them and could'nt hold it at half throttle on an 8.4 volt ni-cad , should go well?).

oh the colour scheme is taken from the italians , green deck,grey sides, red and grey stripes , the green was for use in the med , the red/grey for air identity.all of the wood steps were added by me , the chain railings , the wheel house glass, the depth charge racks, the front hatch, the aerial supports are in scale position,and the flag is on order.

View attachment 7640

View attachment 7639

View attachment 7638

View attachment 7637

/monthly_2005_05/57272b6e99d91_s-130e-boat004s.JPG.97d9fded9d27ede0c43e865e5fc02aaf.JPG

/monthly_2005_05/57272b6e98918_s-130e-boat003s.JPG.77ecec048898de3b02b29fe979933529.JPG

/monthly_2005_05/57272b6e974bc_s-130e-boat002s.JPG.539b28dc43a5104174964f86f6a72b17.JPG

/monthly_2005_05/57272b6e95e20_s-130e-boat001s.JPG.b781af6bd55aeac1c0ef2af539244be8.JPG

View attachment 12932

View attachment 12933

View attachment 12934

View attachment 12935

 

[Paul_H]

Nice work, I like the paint scheme, nice to see something different.

 

[Spook]

Hi there. Nice too see a finished robbe e boat. I am in the middle of building one now, and need all of the encouragement I can get.

Cheers.

Spook

 

[Spook]

Hi there Paul. Is there any chance that you could e mail me those snap's of the e boat ? would be really gratefull. Thanks

Phill

 

[maninblack]

hi

hi all

just joined the site and would like to say that i have just finished a s130

so any help i can give just ask

cheers

maninblack:grinball2:

 

[kleinerschelm]

Hello,

has anybody more pics of the robbe S-130?

how did you fixed the frontdeck to the hull?

greets

 

[maninblack]

Hello,has anybody more pics of the robbe S-130?

how did you fixed the frontdeck to the hull?

greets

hi mate

i put plastic strips, then glued them in place to hull and deck, strapped it up so the sides went as close as poss,, then filled the gaps it does take a few attempts with the filler but it gets there

i think there are pics of mine in gallery

hope that helps

maninblack:music_too

 

[noble]

Hi nice work indeed i have to say, i've built i 1/35 sale version of this from italeri as well as there Elco 80 pt boat. I Have to say i like this a lot very well done.

scott