Bit more done today. After what seems like years ,Ive finally got to the stage of priming this beast. The cockpit apertures have been masked up and its got a gobstopper and an enema out of make up sponge for the overspray! In typical fashion , after I had primed it I realised I hadnt added the armoured plate in front of the cannon. The kit naturally doesnt depict this as its not supposed to be a UTI so I had to cut a thin piece of plastic card and attach this then add the prominent rivets. Another area that I couldnt just leave is the nose wheel bay. The kit offering is just flat and too shallow , I know no one is ever going to see up into there but it would just annoy me if I didnt correct it. The actual wheel bay has a concave section to accomomdate the nose wheel ,so I had to cut out the flat pieces and make a new bay roof. I did this by cutting a hole in some MDF and heating a piece of plastic card and using an old wheel from the spares box forming the shape. It now looks like it should ,even though no ones ever going to see it again. EDIT . for some reason the site wont let me upload any pics , as soon as I can I'll put them on , cheers tony