Looking good Barry.
Odd that they choose to paint the EES's bright green on a camouflage painted hull!
Odd that they choose to paint the EES's bright green on a camouflage painted hull!
Zvezda 1/48 Mil-24N Hind
- Thread starter BarryW
- Start date
Jim R
SMF Supporter
Hi Barry
Looking impressive. Very neat masking.
Jim
Looking impressive. Very neat masking.
Jim
Looking very good Barry
I have done a panel line wash. These are very shallow and fine, does not take a wash as well as some do.
I will be applying several mist coats of
Semi-Matt varnish next before doing some dry brushing and other weathering. But, I need to leave lots of time for the enamel wash to dry and cure so it probably won’t be until tomorrow.
I will be applying several mist coats of
Semi-Matt varnish next before doing some dry brushing and other weathering. But, I need to leave lots of time for the enamel wash to dry and cure so it probably won’t be until tomorrow.
I have done several mist coats of a semi-matt varnish. I will leave it at that on the rotors but will,once it has hardened, spray another mist coat of matt varnish over the main airframe. I want a slightly different sheen on different areas. This is another way to slightly modulate the effect and create more interest. Not a big difference but it does help improve the overall look.
Done..
It did not go back quite as perfectly as it was but it’s fine. There is a little damage to repair including a small breakage that I spotted on the photo that a piece of stretched sprue can solve.
It did not go back quite as perfectly as it was but it’s fine. There is a little damage to repair including a small breakage that I spotted on the photo that a piece of stretched sprue can solve.
