BOOKNOOK by Rolife Glass House book case insert. Scale unknown

[Andy the Sheep]

Sorry I lost this fascinating build of yours, John. Just had a ketchup (as Allen would say) and really enjoyed it.
Hope there's still some seats available somewhere, even in the garden .

 

[Jim R]

Wonderful work John. It's so well designed and so detailed. Great fun as well.

 

[RonGlass]

Paul has his eye on that Rocker, but I'll take that comfy-looking blankey and pillow John

 

[JR]

Looking good. Ever thought about scratchbuilding one of these John? Should be right up your street.

You have a point there Tim, and I would be allowed to keep it in the house when finished , all war is banned so end up in my cave or in the attic .

Coming together nicely John
ATB
Paul

Thanks Paul .

What a very unusual build John but built with great skill.

Different but great to see!

Thanks Bob.

Everyone loves a bentwood rocker.

They do indeed Paul .

This is brilliant John, and everything included in the pack.

Nearly Colin, unfortunately although I have been careful there appears to be one of two things missing. Have had to make a ceiling lamp shade from a plastic bottle cap , that was fun .

Sorry I lost this fascinating build of yours, John. Just had a ketchup (as Allen would say) and really enjoyed it.
Hope there's still some seats available somewhere, even in the garden .

Your very welcome Andrea, a few seats still available.

Wonderful work John. It's so well designed and so detailed. Great fun as well.

Thanks Jim, there's definitely a lot of thought gone into these kits . There's quite a few , you can find them on UTube.

 

[JR]

Paul has his eye on that Rocker, but I'll take that comfy-looking blankey and pillow John

He has Ron, I'll have to stand then , you take the blanket and pillow .

 

[andy55]

Damn it John, you've got me interested. I've an sdkfz250 arriving today, now I'm looking at these kits. Something completely different. Watching with more than interest.

 

[JR]

Damn it John, you've got me interested. I've an sdkfz250 arriving today, now I'm looking at these kits. Something completely different. Watching with more than interest.

They make a nice change Andy, well thought out and precisely make .

 

[JR]

The last few days have seen the model just about finished, just some electrics to do tomorrow. Have left it to dry as have just glued some plants in. Found a few missing instructions , no mention of the switch that appears to on the inside. I've put a drop of thin CA here and there just to pull it all together .A lot of this is just held with the tabs, hence the Ca and white PVA.



Did this in side the house, as needed so much room for the "sprues " .The tape will come off in the morning.

Thanks for the comments and for looking in.

John.

 

[Tim Marlow]

That’s come out really well. Are you putting it in a bookcase?

 

[Mark1]

Looks good

 

[andy55]

That's looking really good John, think I may have found my next build, thanks to you. Would certainly make a pleasant change from things that go bang.

 

[JR]

That’s come out really well. Are you putting it in a bookcase?

Thanks Tim .
Discussions are currently underway with management !

Looks good

Thanks Mark .

That's looking really good John, think I may have found my next build, thanks to you. Would certainly make a pleasant change from things that go bang.

Andy thanks, that's great. I found the majority of it relatively clear, a bit confusing towards the end, but probably me.
Yes that has been said "pleasant change from things that go bang "

 

[Graeme C.]

Looks really good John, The chair & blanket are really nice.

 

[RonGlass]

Looks really good John, The chair & blanket are really nice.

Looks really good John, The chair & blanket are really nice.

Already called dibs on those, Graeme! Pick something else out, sir. Lol !

 

[peterairfix]

I have seen these at my local garden centre so you have inspired me to go and take a more closer look
Nice build as well

 

[JR]

I have seen these at my local garden centre so you have inspired me to go and take a more closer look
Nice build as well

Glad to read that Peter, good fun to do. Remember sanding the end joints is a must as the holes in the other stamped part will tend to have rounded ends. Either that or file the round part out .

 

[Waspie]

Nice one John. First time I have seen one of these. Quite impressive.
Now do want to have a go at my real garden????

 

[BattleshipBob]

Thats lovely John, very well built and so different to the usual build,!

Well done sir, up there to the right!

 

[JR]

Nice one John. First time I have seen one of these. Quite impressive.
Now do want to have a go at my real garden????

Bit far Doug from here

Thats lovely John, very well built and so different to the usual build,!

Well done sir, up there to the right!

Thanks Bob, email later.

 

[Scratchbuilder]

Made it!!! had to fight my way through all the weeds but got here...
Great job Wobble....