I hope this thread is for general shed stuff. If not, can the mods move it elsewhere please.
I've not done much 'plastic' lately. Recently, the wife dropped hints she wanted a Potting shed!
So, to earn me some leisure points, I thought "I'll give her a 'Potting shed, and how!", and after looking at the horrendous price of kit ones, I set to with me tape, paper and pencil...
I had the idea of using second hand glazed pine doors. I found 9 locally for £20 in total and built the shed around these. The shed so far has cost us about £150 and is about 12ft x 8". The decking is 4ft out.
The veranda cum decking is re-cycled stuff from a previous, wind wrecked thingy.
As it is situated against a hedge, a view to the rear was not required, so I built the back out of new 3x2 studding and 8x4 boards.
The roof is corrugated tin. No desperate need for insulation or lights just yet. It's for potting in the daylight hours.
Here it is.
Here's a closer look at one end of the shed.
Veranda from re-cycled stuff from a previous, destroyed sitting area.
I made these plywood profile infills to stop the draft going on the Mem Sahib.
Painted.....
A photo from today. The opening door on the right is slightly different from the other three, but will do until I can acquire an exact match for the other three.
There you go....One happy wife.
Cheers.
Ron