Steven
SMF Supporter
- Joined
- May 6, 2018
- Messages
- 489
- Points
- 93
- Location
- Frederiksberg Copenhagen, Denmark
- First Name
- Steven
That's interesting Simon, I was under the impression that it wouldnt work with Kappaline form board. I have a tube in the store at Race towers and will try on some scrap. Much cheaper than UHU POR .Steven,
I found on my recent Range Rover base that No Nails works well for sticking bits to blue foam and foam to foam.
Don't forget the fridge pipes that run into the building to the indoor units - over here they normally get insulated with black or grey phenolic foam
Steven,
Don't forget the fridge pipes that run into the building to the indoor units - over here they normally get insulated with black or grey phenolic foam
Excuse us again Steven .Hi John - maybe different versions of No Nails??
Stuff I used was in a big toothpaste like squeeze tube and the glue was very thick not runny
No worries mate, feel freeExcuse us again Steven .
Simon..
The standard version and the one I think you mean in the large tube are the same and is made by in the UK by Unibond. The one I was thinking of is in the std tube, and manufactured by. Everbuild. Going to try it this afternoon The spec on the Ever build says it will join PUfoam Styrofoam. So I may well be in luck.
Unfortunately the information regarding what it will stick or not is not specified on the Unibond site. Probely the same make up but by differing company's .
John.
Thanks again Steven.
John.
For FULL Forum access you can upgrade your account here UPGRADE