Ilyushin Il2 -m82 , cut’n’shut ( simon T tribute gb)
- Thread starter yak face
- Start date
Just caught up again Tony. Really liking the work going into this. Keep it up mate.
Jim R
SMF Supporter
Hi Tony
By 'eck this is a job and a half. As others have said it's right up Simon's street. Looks as if it's coming on a treat.
Jim
By 'eck this is a job and a half. As others have said it's right up Simon's street. Looks as if it's coming on a treat.
Jim
Wings fit ok on top , but not so hot underneath , so out with the putty . While i was at it I built up the rear of the wing fillet which was a tad short due to me moving the wings back 5mm . Once this has been sanded I can get the tailplanes on ( if i put them on now theyll get in the way of the big sanding job on the wings) and start looking at the canopy . Im going to have to make a new rear section , probably crash moulding it . 
scottie3158
SMF Supporter
Tony,
Lovely scratchery with a great use of different materials.
Lovely scratchery with a great use of different materials.
The neatly applied putty has now been sanded 
. The extended wing fillets came out ok too , and the joints have all had a quick brush over with grey to see if any more work needs to be done , its looking ok so far . The tailplanes and undercarriage nacelle fronts have also been glued , so its onto the canopy next. 
. The extended wing fillets came out ok too , and the joints have all had a quick brush over with grey to see if any more work needs to be done , its looking ok so far . The tailplanes and undercarriage nacelle fronts have also been glued , so its onto the canopy next. 
Nice putty work. That must have taken a while! Worth the effort though.
Now the airframes together and just about ready for primer its time to look at the canopy . The M-82 canopy is shorter and a different shape to the later , production, two seater . The kit supplies 2 canopies , long and short , but neither has the rear shape needed for this aircraft . The front and middle sections are the same so its a case of chopping off the rear and making a new section . I cut off the rear section of the shorter canopy and after wrapping it in tape filled it with milliput.After sanding to shape this will hopefully give me a former of the right shape to crash mould a new rear section . 
D
Deleted member 7181
Guest
Some very fine surgery going on Tony. I'll be really interested to see how the moulding process works.
Interesting to see how you do this Tony. Never attempted anything like this myself.
Finally got round to having a go at making the rear canopy. The previously seen Milliput former was sanded to shape and mounted on a stick . I sourced various pieces of clear plastic ranging from washing up bottles to yoghurt pot lids and started to experiment . I cut a hole in a piece of 6mm MDF ( anything will do -ply , thin wood etc ) and fastened the pieces of clear plastic to this with a couple of bulldog clips 
I then fastened the heat gun in the vice and with the lowest setting heated up the plastic and when soft enough plunged the former through. This took multiple attempts and various different types of plastic until I got something i was happy with . The upshot is that the washing up liquid and stardrops spray bottles are not ideal , being too thick and curling up and going milky or developing air bubbles when heated. The other plastics i tried ( yoghurt pot lid and plastic packaging that the resin exhaust for the starfighter came in ) were much better and i got several that could be used.
The relevant sections were cut off and cut down bit by bit with a lot of trial fitting until i was happy with the fit . The rear has a cut out for the gun so this was carefully marked and cut out before masking the clear section . The front part of the canopy ( kit supplied ) was glued on first with AK ultra glue then ,once firm enough to be handled ,the rear section stuck on with superglue . The edges will need a little filling but most of this rear section is painted anyway.
I then fastened the heat gun in the vice and with the lowest setting heated up the plastic and when soft enough plunged the former through. This took multiple attempts and various different types of plastic until I got something i was happy with . The upshot is that the washing up liquid and stardrops spray bottles are not ideal , being too thick and curling up and going milky or developing air bubbles when heated. The other plastics i tried ( yoghurt pot lid and plastic packaging that the resin exhaust for the starfighter came in ) were much better and i got several that could be used.
The relevant sections were cut off and cut down bit by bit with a lot of trial fitting until i was happy with the fit . The rear has a cut out for the gun so this was carefully marked and cut out before masking the clear section . The front part of the canopy ( kit supplied ) was glued on first with AK ultra glue then ,once firm enough to be handled ,the rear section stuck on with superglue . The edges will need a little filling but most of this rear section is painted anyway.
Neil Merryweather
SMF Supporter
That end result is better than the kit canopy! Top job, Tony!
I like the tribute to Simon photo of it on your knees too.
For future reference the best plastic to use is something that has already been vac-formed, like the packaging, rather than blow-moulded like the bottle
Cheeers
N
I like the tribute to Simon photo of it on your knees too.
For future reference the best plastic to use is something that has already been vac-formed, like the packaging, rather than blow-moulded like the bottle
Cheeers
N
Cheers neil , youre bang on with the plastic , although ive had some decent results in the past with bottles , the packaging seems to be the best bet , cheers tony
ps. Nice to see you got the Simon reference re. the knee shot !
Some great work Tony