removing spray lines

[meggsy]

Jus sprayed a tamiya 1/24 scale car body with tamiya spray but where it was masked of I've got a raised line I don't really want to go near it with wet and dry do any of you know of another way to blend the lines in any advice would be greatly recieved

 

[Ian M]

Bummer!

Removing the masking tape as soon as you dare after painting is the best way. Once the edge has formed it's only going to go away one way. Well two actually but stripping the whole lot is a bit over the top....

Out with the wet and dry. Get it as close as you can then polishing compounds might manage the last.

Ian M

 

[stona]

I think you'll have to sand it off. It's best to avoid the problem in the first place. Spray away from masking,several light mistings and,as above, get the masking off as soon as is practicable.

Cheers

Steve

 

[meggsy]

cheers for the info now ive had chance to properly look at it now its dry its not as bad as first looked plus the decals will cover it so il get the wet and dry on it