- Joined
- Jul 2, 2013
- Messages
- 11,070
- Points
- 113
- First Name
- Si.
I got this prebuilt with bits missing free from a facebook group member, which was very nice of them.
I added piece to the interior, and used a very fine powder to simulate silt, rust etc. This was problematic as I struggled to get some areas properly. I thought, as it was old it may have come apart but was too brittle.
The outer was done in the usual sand method.
Hours in painting and building up the coats, once done I did a gloss coat to simulate the wet slimy look.
Not the best sunken sub I have made.
I added piece to the interior, and used a very fine powder to simulate silt, rust etc. This was problematic as I struggled to get some areas properly. I thought, as it was old it may have come apart but was too brittle.
The outer was done in the usual sand method.
Hours in painting and building up the coats, once done I did a gloss coat to simulate the wet slimy look.
Not the best sunken sub I have made.
Attachments
-
274928255_1132741787568510_1612885107462574200_n.jpg265 KB · Views: 36
-
275310866_685886182537329_1514538573927988047_n.jpg272.9 KB · Views: 32
-
275706893_343201897747592_52366413956675657_n.jpg389.1 KB · Views: 32
-
275780955_1839826746214630_2382438894411592826_n.jpg170.8 KB · Views: 32
-
275800630_2107911669366931_359276338545356633_n.jpg231.1 KB · Views: 33
-
275865736_537609284342669_3506950144420354852_n.jpg113.4 KB · Views: 28
-
275843020_570532067895245_6175420951342569803_n.jpg309.7 KB · Views: 29
-
275911660_290927289833071_5148324934336690589_n.jpg162.8 KB · Views: 27
-
275916726_434830448417729_8543003227153140289_n.jpg189.9 KB · Views: 36