Bri62
SMF Supporter
WELL Bri low voltage led 2mm or 3mm ? an wired in series fitted with a sutible resistor an how or wat do you want to operate ?Going to light it with led's will 3v in series be ok? I already have a 3v power supply, plus I would like to be able to operate it remotely from behind the Perspex what would I need?
Thanks
Most welcome all furniture and food waterproofedI'm diving in to get a first row place; hope water is warm and biccies waterproofed....
YES Bri should work on 3 v leds with a 3 v power supply but with 23 leds may not get much run time but there are so many different leds as 23 well thats why i said low power ones but ive always wired up my low power ones in series with a resistor an no more than 4 at a time but these modern leds may be ok have a practice with them before you fit them in as at times on my big nimitz model i used xmas leds in pic belowChris I was told if I have a 3v power supply and 3v micro surface led's I won't need a resistor I may be wrong, also just a simple on/off remote control for 2 circuits one white and 1 red (action stations) The whole sub will need 23 white and 12 red
Thanks Chris will have a play when I get someYES Bri should work on 3 v leds with a 3 v power supply but with 23 leds may not get much run time but there are so many different leds as 23 well thats why i said low power ones but ive always wired up my low power ones in series with a resistor an no more than 4 at a time but these modern leds may be ok have a practice with them before you fit them in as at times on my big nimitz model i used xmas leds in pic below
For FULL Forum access you can upgrade your account here UPGRADE