Paul - yes, I have been enjoying this one
Scottie - ta. Consumer unit and socket could be better - they seem to be a bit on the wonky side looking at them now
Richard - there are always plenty of other builds waiting to start.......
Jim - thanks. Not convinced by the leccy stuff so may redo
Managed not to fall asleep so did some more on the roof
Sprayed a good coat of AK Worn Effects then when that had dried a blotchy coat of
Tamiya medium grey with an overspray of the lighter JA Grey
Wetting the surface to activate the peeling process caused the roof panels to start lifting, bending and generally going a bit wonky
as I suspected from previous use the AK fluid has removed all tonal variation from the base coat
I had various shades of red brown and orange brown at the start but now it all looks pretty much a uniform dark brown
Nevermind, it will get some more pigments which will hopefully lift the rust shades and make it less uniform