Mike - I rather enjoy reworking these old T34 based kits
Richard - cheers
Paul - I rather like John Wick. 3 does go a bit weird though
John - agreed. The broken hubs are annoying but should be easy enough to fix - I made them before so can make them again
Finished off the left track last night
Rather annoyingly as I was adding the last run of links on the top I found that I was 3/4 of a link short of joining the links already installed on the drive sprocket
With no adjustment available in the wheels I had to bodge it a bit
by flooding one of the joints on the bottom run near the back end I managed to separate the track
I could then turn the sprocket to enable the track to join to the main top run
on the bottom run I shaved down two links to 3/4 width and inserted in the gap - doesn't look too noticeable and a bit of mud should hide things nicely
![t34-76-020_2020-5-2.jpg t34-76-020_2020-5-2.jpg](https://www.scale-models.co.uk/data/attachments/251/251696-7839e254741c31f6b51a4d13bb0e9196.jpg)
I now have a removable wheel/track combo
For the right side, knowing now that there is a chance of them not fitting, I shall start with the top run so the adjustment point, if required, will be on the bottom run hidden by a wheel