so rather than airbrushing it again i went old school and used a hairy stick
when i airbrushed it i did the green, then put an edge of brown either side,.....i think the over spray from the brown drowned out the green, so i used a flat paint brush to go over the top of the green, taking away the overspray......hope that made sense
the wheels have had some pigment added in the treads,,,,,vehicle has had some dark wash inside and some mud added to the floor..........outside has had a oil spot filter
im now going to leave it well alone for a few days for the oil to dry before final assembly and a matt coat on top