Limiting my benchtime to less than an hour for the moment, I've been finding a few more problems - the wing joints - on the right side the wing slot is noticeably lower than the left! A bit of surgery needed.
After a bit more fettling - the filler was needed. PPP dries pretty quickly, so I was able to rub it down within my time limit...................
I'll let this really dry out overnight, then have another look to see if there any glaring gaps. I'll add the floats, radiator & oil cooler, before starting the priming process
Dave
After a bit more fettling - the filler was needed. PPP dries pretty quickly, so I was able to rub it down within my time limit...................
I'll let this really dry out overnight, then have another look to see if there any glaring gaps. I'll add the floats, radiator & oil cooler, before starting the priming process
Dave