M
maninblack
Guest
hi all
first primer coat to see imperfections
very interesting project !!!!
cheers
M.I.B
first primer coat to see imperfections
very interesting project !!!!
cheers
M.I.B
Hi Mick,\ said:hi subgot some good pics so ok on that front, are you
working on anything at the moment?:grinball2:
mick
Never mind, don't care if it doesn't, still is a great model and a graet job!\ said:hi matesorry to disappoint but only surface going next one may be a diver!!
still working on water jet system for propulsion
cheers
mick
Hi Mick,\ said::smile11:hi ladsfitted my kehrers to the bottom of skydiver, i have 1 BIG problem..
when powered they work fine then 1 stops only 1 the same one
tryed jets before and worked fine...
when running you can see the water but when the 1 which stops the water is frothy, felt underneath when running and sucking fine then nothing even with outlet under water, if you power than stop than power it seems to work fine, please help lads
M.I.B
hi sub\ said:Hi Mick,When you say stops, do you mean the motor stops running or is it the motor keeps running but it doesn't produce a jet of water ?
If so, its cavitation inside the ventury it can suck air in and it forms a bubble which will not get pushed out as it gets trapped just make it a little bit heavier or lighter at the rear, it should cure it. My Pibber does it when it leaps out of the water but just for a second until it bites then its off again.
The outlets are intended to be 3/4 submerged not fully as this will stop the air comming out
Hope this helps.
Regards Sub.
The only thing I could suggest is to measure the thing and see if its the same size as either the Graupner ones or the Robbe ones and see if you can obtain a spare from a model shop who stocks them, try Flying models at Leeds.. they can get just about anything as they deal with both Robbe and Graupner I believe, ( I think the last full jet I bought was about £30 ) other than that its back to KMB.\ said:hi subdo you no where i cn get a stator for my jet had a slight mishap!!!!!!
kmb is crazy shipping price!!!!
mick
For FULL Forum access you can upgrade your account here UPGRADE