- Joined
- Mar 2, 2015
- Messages
- 3,410
- Points
- 113
- First Name
- Robert
Well a bit more progress to the phantom today if not a lot . After leaving the fuselage overnight to dry and set with glue I started on the wing section or sections should I say as three parts each side make the undercarriage doors and there are also two air brakes.
So on with clean up and black primer 74.602 negro. 2 light coats then sset to dry
On with the filling and sanding of the fuselage.
I taped off either side of the seams so in aid to not to lose too much detail when sanding.
I still lost a lot but I'll be getting the scribe set soon in the post so I can at least know I won't lose all the detail.
The undercarriage bays and doors got 2 light coats of thinned white model air 71.001 I may go over later with a gloss white before sealing the paint.
I'm really enjoying this even if there are a few issues here and there.
Enjoy
So on with clean up and black primer 74.602 negro. 2 light coats then sset to dry
On with the filling and sanding of the fuselage.
I taped off either side of the seams so in aid to not to lose too much detail when sanding.
I still lost a lot but I'll be getting the scribe set soon in the post so I can at least know I won't lose all the detail.
The undercarriage bays and doors got 2 light coats of thinned white model air 71.001 I may go over later with a gloss white before sealing the paint.
I'm really enjoying this even if there are a few issues here and there.
Enjoy