Steve-the-Duck
SMF Supporter
A powerboat or sand skimmer?
Every time I look at it I see a boat. Hopefully that won't last!A powerboat or sand skimmer?
Such a clever idea!Many thanks Steve, your wish is my command
After some testing, playing the strip over my heat gun at 300°C for 20 seconds softened it just enough to be moulded around a make up brush ferrule:
View attachment 504630
I made plenty. There are a few test rejects in the picture too:
View attachment 504631
Lined up in size order, they were then trimmed and glued in place one by one:
View attachment 504632
View attachment 504633
After some shaping with a rotary tool then sanding with 60 grit, we're starting to get the shape I'm after:
View attachment 504634
Genius!Many thanks Steve, your wish is my command
After some testing, playing the strip over my heat gun at 300°C for 20 seconds softened it just enough to be moulded around a make up brush ferrule:
View attachment 504630
I made plenty. There are a few test rejects in the picture too:
View attachment 504631
Lined up in size order, they were then trimmed and glued in place one by one:
View attachment 504632
View attachment 504633
After some shaping with a rotary tool then sanding with 60 grit, we're starting to get the shape I'm after:
View attachment 504634
I'm planning weaponry of some kind...Will there be guns or just engines? Great imagineering.
Definitely something I find difficult...... and scribing panel lines over a mixed surface proved tricky for me,
For FULL Forum access you can upgrade your account here UPGRADE