Hey ho week ago to day went to dentist ,had a crown fall out (pin and all not bad though must have been in there for at least forty years )so any way cut a long one short thought I was popping in just to get it cemented back in place what was it Kyle sang i should be so lucky ,ended up having to have bone removed from upper jaw the crown next to the one that fell out removed this was fixed to the original tooth not a steel pin like the other one , that all snapped leaving the root in wich it seems wasn't to happy to be evicted but apparently when all healed will be good to have a bridge fitted bloody bridge to far if you ask me still a week on and its not to bad now. Have got up and down from the bench(dining room table) it serving as a distraction from the discomfort recon ive pushed it as far as possible now without paint so shall clear the bench and set up for some
airbrush work ,any glazing can go in at the final throws as I bolt it together I dont honestly think much of the interior will be visible but I'll make the effort. I have on my last few builds started to fix a lot of the small pieces with CA not easier by any stretch but much stronger especially if the plastic is that soft stuff touching the part with extra thin(anybodies) you can almost watch small pieces melt away ,anyway heres where were at
That bloody mesh stuff just falls apart liquid cement won't even touch it ive had to fix it all with CA
Talk about a pain in the gums do your best to cut it over size fix it with the CA then trim it off carefully strand by strand.
And to finish of a couple of shots of it just mocked up
Other half off to visit her mum next week so should find some time to crack on with the paint ,im off now before bed to swill my mouth round with some bourbon strictly medicinal you understand. Dave