Was up in the stash earlier on looking for something none modelling related but had to shift a lot of the kits - found an unopened LS 1:1 Remington Army, a Verlinden 120mm Kubelwagen and an Italeri RSO/01 that I had forgotten about. (recently bought another RSO - oops). Also found that I have four 1:25
Tamiya Tigers and at least two of the 1:25 Centurions. Also came across a Dragon Scud B which I knew I had but couldn't remember quite where I had put it
Anyway, decided to use todays modelling time to do a little more on this one
![t18-042_2019-10-6.jpg t18-042_2019-10-6.jpg](https://www.scale-models.co.uk/data/attachments/227/227441-cbcbd6447460031922bb6f94900a8cde.jpg)
added some detail to the inside face of the drivers visor
![t18-046_2019-10-6.jpg t18-046_2019-10-6.jpg](https://www.scale-models.co.uk/data/attachments/227/227445-732a7e2892e91edced52200e0ad06f2e.jpg)
installed the visor then added a stay and some bolt ends for the hinges
![t18-040_2019-10-6.jpg t18-040_2019-10-6.jpg](https://www.scale-models.co.uk/data/attachments/227/227439-697e9d2acb7e3657e1ce04916fb986b7.jpg)
bit hard to see but have undercut the solid shovel bracket on both sides so doesn't look solid
![t18-047_2019-10-6.jpg t18-047_2019-10-6.jpg](https://www.scale-models.co.uk/data/attachments/227/227446-892717e0d23aa7b9b7773e680ca9f768.jpg)
the back end of the shovel was just left floating about - you wouldn't keep you shovel very long like that so I added a tie down
![t18-043_2019-10-6.jpg t18-043_2019-10-6.jpg](https://www.scale-models.co.uk/data/attachments/227/227442-6099f3c5c2824c9eba71b55c3fa226a8.jpg)
the front track guard supports were not wide enough so I cut them off, drilled the bracket and added some lengths of brass tubing
also drilled out the headlight and the siren horn
front door handles replaced with plastic rod
![t18-045_2019-10-6.jpg t18-045_2019-10-6.jpg](https://www.scale-models.co.uk/data/attachments/227/227444-a32a6b3b23fdff96750d77a36a7d5955.jpg)
the hull and turret rear grab handles were also replaced with rod
nearly there now - mg to add to turret and the track guards to make
in spite of the various small errors I rather like this little oddball tank