Jim R
SMF Supporter
You're really going to town with this Alan. A lot of work but already you can see how worth while it is.
You're really going to town with this Alan. A lot of work but already you can see how worth while it is.
Phil Flory has done a build of it on YT. He mentions one issue regarding the rear bulkhead for the nightfighter cockpit. But very easy fixed. Have a watch/save it and it'll help no endI have Revell's 1/32 U-1/B-1 nightfighter in the stash. If there are probs with your kit, please let us know about them, so I can make notes for mine.
Chances are that the milk bottle is polyethylene and the electrical cord is PVC or something similar, both of which are hard to glue. There are solvent-based glues for PVC specifically and superglue probably works, but PE is almost impossible to really glue with anything except superglue combined with a pre-treatment that some glue manufacturers sell (usually as a kind of marking pen with which to apply it before using the glue). Since this will all be inside the engine, it really only needs to stick together long enough for you to be able to put it in place, thoughAlso tried Tamiya glue as i thought it would weld the plastic but it didn't.
For FULL Forum access you can upgrade your account here UPGRADE