scotties pioneer.
- Thread starter scottie3158
- Start date
scottie3158
SMF Supporter
Cheers Simon they will be rectified.
Hi Paul, missed a lot of this as not been on here much this past week .
Tool boxes look perfect, we used to stow ropes, compo rations, Crow bars, and 16 linker ground anchors and pins plus any other crap you can think of .
Whole build is top notch as usual.
Tool boxes look perfect, we used to stow ropes, compo rations, Crow bars, and 16 linker ground anchors and pins plus any other crap you can think of .
Whole build is top notch as usual.
scottie3158
SMF Supporter
Thanks mate glad you like it. Where did you keep the snatch blocks?Hi Paul, missed a lot of this as not been on here much this past week .
Tool boxes look perfect, we used to stow ropes, compo rations, Crow bars, and 16 linker ground anchors and pins plus any other crap you can think of .
Whole build is top notch as usual.
BigGreg
SMF Supporter
- Joined
- Apr 27, 2018
- Messages
- 2,050
- Points
- 113
- First Name
- Gregory
I saw them too but i didn't dare to say it..
scottie3158
SMF Supporter
Hi Greg, if you see something wrong shout out it's the only way to improve. I missed these ones so glad they were spotted.
Very fine, excellent work as usual Paul.
Andy
Andy
scottie3158
SMF Supporter
Not a lot done today. I corrected the mould lines that Mr T spotted. And made up the boxes for the other side. The etch was added as was the wood grain as per the other side.
I have left the boxes off so I can paint them easier and do the weathering around the jib.
I will remove the etch from the last pic as I'm not sure about the wood effect.
cheers
Scottie
I have left the boxes off so I can paint them easier and do the weathering around the jib.
I will remove the etch from the last pic as I'm not sure about the wood effect.
cheers
Scottie
scottie3158
SMF Supporter
Keys?
The pins on a chain to hold the doors closed during rough rides? PaulE
BigGreg
SMF Supporter
- Joined
- Apr 27, 2018
- Messages
- 2,050
- Points
- 113
- First Name
- Gregory
i thought they were keys... then i better looked and it's like a pin right??
scottie3158
SMF Supporter
Yes mate. I will leave making keys to the Mr. It's of this world lol
scottie3158
SMF Supporter
Simon, your right there plus it didn't show the separate planks so it's gone now.A bit 1970's MFI wood effect
scottie3158
SMF Supporter
That's the ones Paul
scottie3158
SMF Supporter
A bit of hairspray chipping to the boxes and floor boards. Some hasps and padlocks added. next all was glossed ready for the pin washes.
And the cab sections completed ready for paint.
added some details to the floorboards. And reworked the seat cushions to avoid the plastic block look.
cheers
Scottie
And the cab sections completed ready for paint.
added some details to the floorboards. And reworked the seat cushions to avoid the plastic block look.
cheers
Scottie
scottie3158
SMF Supporter
Thanks Andy still some details to add to the cab but they will be scratched.